But do it at Risk
Posted by Mike Nieuwoudt on April 14, 1999 at 12:51:31:
In Reply to: If I can Teach Daphne Greene (US CT Team) To Do it.... posted by MG/WCB on April 13, 1999 at 22:43:25:
Hi Guys
Method is OK for quick fix, but broken stub and resulting grinding leads to metallic residue in oil (checked similar failure a while ago with spectographic oil analysis, it was DIRTY, also lots of visible splinters of steel in sample) which WILL damage pinion bearings and gears. So do the job properly ASAP or prepare for secondary damage.
Cheers
Follow Up Messages
| 
