| Not good brakes HELP Posted by haggis1 on December 26, 2006 at 08:03:24:
Help, I recently changed the axles on my s2a hybrid v8 off roader to range rover axles, "not a problem",eveything fixed -drove off to try the new bits and found out that the brakes were u s- , bled them again, complete change of fuid -two new calipers on the front, 90 ones to save using the two pipe system from the rr, new servo and master cyl and vacum valve from the manifold, still no brakes , full set of pads and serviced calipers , still no brakes ,I have avery good hard pedal and if I really put my full 14stone on the pedal I can just about get them to lock up,their is no uneven pulling of any one cyl they all seem to be the same. Heeeeeelp.ronnie
|
