Posted by captcory on October 12, 2005 at 12:21:04:

In Reply to: SeriesIIA gearbox leak from inside bellhousing posted by captcory on October 10, 2005 at 16:07:42:

I think I found the problem...I decided to pull the fill plug just to see how low the gearlube was and lots of gearlube came out. This leads me to believe that there is water in the tranny. The higher than normal level of liquid in the case lead to the leak that I had from the throwout bearing. Just because milky oil is not dripping doesn't mean that there isn't water in the lube or oil for that matter. I just caught it before it emulsified.