Re: Transmission oil leak Posted by ray wood on December 13, 1998 at 09:49:56: In Reply to: posted by Eric on December 13, 1998 at 07:33:36: There is no seal in the transmission input shaft on the IIA. The input shaft is well above the correct oil level and there is a helix cut on the shaft which pumps any oil weeping along the shaft back into the transmission. I think the tranny must be very overfull. Place a pan under the transmission and loosten off the level plug which is located on the drivers side of the main transmission housing just aft of the bell housing. I think you will get a flood of oil out. Wait until the drips stop and replace the plug. Ray
|
