| Re: window regulator Posted by sam on March 15, 2004 at 11:55:36: In Reply to: window regulator posted by Isaac on March 12, 2004 at 14:26:04:
not difficult at all... trickiest part would be trying to take the door panel off without breaking the tabs.. get a longer thin piece of plastic or metal and shove it in between the panel and the door to locate the tabs... with a panel remover ( highly suggest picking one up.. noe expensive and will prolly save you alot of pain if you break the tabs off) remove the door panel... depending on which door you're doing, you have to remove the pull bar (rear door) and take the wee screw out from the door latch thingie.. once your panel is off, carefully take the vapour barrier off, you'll see couple of screws holding the regulator on the door, you might have to remove the accutator and bracket, once you have the regulator removed, take the motor off the old one and install on new one.. and then slap everything back together... should take you about an hour or so if you doing it for the first time... |
