Re: front output shaft (bearing) on transfer box (play?) Posted by MG/WCB on October 31, 1998 at 23:11:54: In Reply to: front output shaft (bearing) on transfer box (play?) posted by Dylan Temple on October 31, 1998 at 05:26:38:
Ho Hum... On BW transfer this can be somewhat common as it is fitted with Ball Bearing throughout. On yours, if I remember right (brain fade right now, too much Halloween candy!), it has a Ball on the front output instead of a Roller as earlier boxes had... thus the play. I'd undo the prop shaft at the transfer and make sure nut is torqued up to spec... First you'll have to undo it , then re-torque. Maybe loose.... |
