Posted by ldave91r on December 16, 2001 at 12:14:54:

I've pulled just about everything out. I unscrewed the bolt and c-clamp that hold the distributor housing in place so that I can now rotate it freely. But I can't pull it out. It seems that the kingpin you see in the picture and the plate at its base are holding everything in.. Is there something left to do because I've already tried pulling it out with some muscle.

Thanks

• distributor

• All Done and Life is Good ldave91r Mon Dec 17 23:45:46 2001 (0)
• Re. Distrubutor removal PeterW Mon Dec 17 06:47:41 2001 (1)
  • Re: Re. Distrubutor removal ldave91r Mon Dec 17 12:22:46 2001 (0)
• never mind I got it off.. n/m ldave91r Sun Dec 16 12:32:34 2001 (1)
  • Now it won't start.. What is the air gap per the manual? ldave91r Sun Dec 16 16:24:27 2001 (0)